Page 1
Assembly Instruction Manual MODEL NO.: CHRYSLER1500 CHRYSLER1800 - Please follow these assembly instructions as it will save you time, make assembly easier and prevent possible damage to your new unit. - Correct assembly is your responsibility. - We strongly recommend that the unit is assembled on a soft surface such as carpet or blanket.
Page 4
Do not full tighten the screw (Part 10) before all parts are assembled Do not full tighten the screw (Part 10) before all parts are assembled...
Page 5
Use a screw driver to fasten the screws (Part 12) into the shelves.
Page 6
Use a screw driver to fasten the screws (Parts 13 and 15) into Part 8. Use a screw driver to fasten the cams (Parts 14) onto Parts 15 arrowhead on cam points toward to the hole on the panel edge.
Page 7
Fitting Anti-Tip Straps for Chrysler1500 NOTE: For gyprock walls ensure you locate the studs, or use appropriate to the wall. (also see Step 8) Fitting Anti-Tip Straps for Chrysler1800 NOTE: For gyprock walls ensure you locate the studs, or use appropriate...
Page 8
Use a screw driver to fasten the screws (Part 17) into the wall. Use a screw driver to fasten the screws (Part 13) into the bracket.
MODEL NUMBER OF THE UNIT PURCHASED DESCRIPTION/PART NUMBER OF THE MISSING OR FAULTY PART QUANTITY OF THE PARTS NEEDED If for whatever reason you cannot get in contact with the store, please get in contact with Criterion direct at http://www.rvm.com.au/contact. Product of RVM Australia...
2. Subject to Clause 1, the Seller warrants that CRITERION branded products will be free of manufacturing defects and will perform to the Seller’s specifications subject to the following clauses.
Need help?
Do you have a question about the CHRYSLER1500 and is the answer not in the manual?
Questions and answers