Advertisement
Quick Links
- Please follow these assembly instructions as it will save you time,
make assembly easier and prevent possible damage to your unit.
- Correct Assembly is your responsibility.
- We strongly recommend that the unit is assembled on a soft
surface such as a carpet or blanket.
- We suggest the use of hand tools only to tighten the screws
and fittings, as power tools can strip threads if over tightened.
- When moving this furniture item, always carry the unit. Dragging
or sliding the unit could damage the unit and the floor surface.
- Due to the weight and size of this desk it is recommended that
assembly and installation be completed by two people.
- When possible assemble the unit where it is to be used
to limit the need to move it again.
MENTOR1600L
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Criterion MENTOR1600L
Summary of Contents for Criterion MENTOR1600L
- Page 1 MENTOR1600L - Please follow these assembly instructions as it will save you time, make assembly easier and prevent possible damage to your unit. - Correct Assembly is your responsibility. - We strongly recommend that the unit is assembled on a soft surface such as a carpet or blanket.
-
Page 2: Exploded View
EXPLODED VIEW Due to the weight and size of this desk, and the associated components, it is recommended that assembly and installation be completed by two people. TOOL REQUIRED HARDWARE KIT x 74 x 74 x 18 x 24 x 74 CAM STICKERS IMPORTANT: MISSING / DAMAGED PARTS WILL NOT BE REPLACED UNLESS THE INFORMATION REQUIRED IS SUPPLIED IN FULL... - Page 3 STEP1 x 18 STEP2 STEP3 x 12 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
- Page 4 STEP4 STEP5 STEP6 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
- Page 5 STEP7 STEP8 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
- Page 6 STEP9 STEP10 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
- Page 7 STEP11 STEP12 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
- Page 8 STEP13 x 10 STEP14 x 10 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
- Page 9 STEP15 Roll Unit Over WR ´[ %DVH WR UHWXUQ STEP16 x 10 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
- Page 10 STEP17 x 10 STEP18 Roll Unit Over arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
- Page 11 STEP19 !Use E1 Screw to secure drawer base to bottom of Part 16! (Take care not to split wood) Drawers STEP20 Insert Drawers into Return. Fit Cable management components. arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
- Page 12 STEP21 ! Before moving to the next step please position Return where it will be used in the office ! STEP22 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
- Page 13 STEP23 Secure modesty panel to Leg with six screws, part E1 ! Before moving to the next step remember to position Return where it will be used in the office ! STEP24 ! Due to the weight of the Leg Please Don’t move Desk with Leg and Modesty Panel attached ! arrowhead on cam points toward to the hole on the panel edge.
- Page 14 STEP25 STEP26 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
- Page 15 STEP27 x 12 x 74 CAM STICKERS Cover CAM Locks with Stickers Supplied Secure desk top to Leg with twelve screws, part E1 and two part H...
- Page 16 MODEL NUMBER OF THE UNIT PURCHASED DESCRIPTION/PART NUMBER OF THE MISSING OR FAULTY PART QUANTITY OF THE PARTS NEEDED If for whatever reason you cannot get in contact with the store, please get in contact with Criterion direct at h p://www.rvm.com.au/contact/ Product of RVM Australia...
-
Page 17: Warranty Policy
2. Subject to Clause 1, the Seller warrants that CRITERION branded products will be free of manufacturing defects and will perform to the Seller’s specifications subject to the following clauses.
Need help?
Do you have a question about the MENTOR1600L and is the answer not in the manual?
Questions and answers