Page 1
MENTORWUL - Please follow these assembly instructions as it will save you time, make assembly easier and prevent possible damage to your unit. - Correct Assembly is your responsibility. - We strongly recommend that the unit is assembled on a soft surface such as a carpet or blanket.
EXPLODED VIEW Due to the weight and size of this desk, and the associated components, it is recommended that assembly and installation be completed by two people. TOOL REQUIRED HARDWARE KIT x 56 x 56 x 10 x 24 x 58 x 86 CAM STICKERS IMPORTANT: MISSING / DAMAGED PARTS WILL NOT BE REPLACED UNLESS THE INFORMATION...
Page 3
STEP1 x 12 STEP2 STEP3 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
Page 4
STEP4 STEP5 STEP6 x 18 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
Page 5
STEP7 STEP8 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
Page 6
STEP9 STEP10 STEP11 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
Page 7
STEP12 STEP13 STEP14 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
Page 8
STEP15 STEP16 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
Page 9
STEP17 x 10 STEP18 x 10 STEP19 x 24 arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
Page 10
(repeat for all hinges) STEP20 x 28 STEP21 x 56 (repeat for all hinges) arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
Page 11
STEP22 Suggested location of Anti-tip Straps. individual needs Attach straps “J” to wall unit. To prevent Cabinet from tipping arrowhead on cam points toward to the hole on the panel edge. ! It is Recommended that Assembly and Installation be Completed by Two People !
Page 12
MODEL NUMBER OF THE UNIT PURCHASED DESCRIPTION/PART NUMBER OF THE MISSING OR FAULTY PART QUANTITY OF THE PARTS NEEDED If for whatever reason you cannot get in contact with the store, please get in contact with Criterion direct at h p://www.rvm.com.au/contact/ Product of RVM Australia...
2. Subject to Clause 1, the Seller warrants that CRITERION branded products will be free of manufacturing defects and will perform to the Seller’s specifications subject to the following clauses.
Need help?
Do you have a question about the MENTORWUL and is the answer not in the manual?
Questions and answers