Download Print this page

Advertisement

Quick Links

Assembly Instruction Manual
MODEL NO.: BRUNSWICK1800
- Please follow these assembly instructions as it will save you time, make
assembly easier and prevent possible damage to your new unit.
- Correct assembly is your responsibility.
- We strongly recommend that the unit is assembled on a soft surface such
as carpet or blanket.
- We suggest the use of hand tools only to tighten all screws and fittings,
as power tools can strip threads if over tightened.
- When moving this furniture item, always carry the unit. Dragging or
sliding the unit could damage the unit and the floor surface.

Advertisement

loading
Need help?

Need help?

Do you have a question about the BRUNSWICK 1800 and is the answer not in the manual?

Questions and answers

Summary of Contents for Criterion BRUNSWICK 1800

  • Page 1 Assembly Instruction Manual MODEL NO.: BRUNSWICK1800 - Please follow these assembly instructions as it will save you time, make assembly easier and prevent possible damage to your new unit. - Correct assembly is your responsibility. - We strongly recommend that the unit is assembled on a soft surface such as carpet or blanket.
  • Page 2: Part List

    PART LIST 1 x 1pc 2 x 1pc 3 x 1pc 4 x 1pc 5 x 1pc 6 x 1pc 7 x 1pc 8 x 1pc 9 x 2pcs 10 x 1pc 11 x 1pc 12 x 1pc 13 x 1pc 14 x 2pcs 15 x 2pcs 16 x 2pcs...
  • Page 3 OVERVIEW...
  • Page 4 STEP 1 31 x 6pcs 31 x 6pcs Screw Driver Required STEP 2 30 x 6pcs Set aside after this step is completed. 32 x 6pcs Screw Driver Required arrowhead on cam points toward to the hole on the panel edge.
  • Page 5 STEP 3 Repeat this step to assemble other drawer compartment 33 x 18pcs 31 x 2pcs 30 x 2pcs Screw Driver Required STEP 4 34 x 4pcs 37 x 2pcs Screw Driver Required...
  • Page 6 STEP 5 30 x 2pcs 31 x 2pcs 32 x 2pcs Screw Driver Required arrowhead on cam points toward to the hole on the panel edge. STEP 6 30 x 4pcs 31 x 4pcs 32 x 4pcs Screw Driver Required 30 x 2pcs arrowhead on cam points toward to the hole on the...
  • Page 7 STEP 7 30 x 4pcs 31 x 4pcs 32 x 4pcs Screw Driver Required arrowhead on cam points toward to the hole on the panel edge. STEP 8 30 x 4pcs 31 x 4pcs 32 x 4pcs Screw Driver Required arrowhead on cam points toward to the hole on the panel edge.
  • Page 8 STEP 9 33 x 10pcs 32 x 10pcs Screw Driver Required STEP 10 Assembled in STEP2 30 x 8pcs 31 x 8pcs...
  • Page 9 STEP 11 34 x 24pcs 29 x 4pcs STEP 12 28 x 8pcs...
  • Page 10 STEP 13 35 x 4pcs 36 x 4pcs Screw Driver Required STEP 14 34 x 4pcs Screw Driver Required...
  • Page 11 STEP 15 39 x 2pcs NOTE: For gyprock walls ensure you locate the studs, or use appropriate to the wall. (also see Step 16) STEP 16 33 x 2pcs 38 x 2pcs Use a screw driver to fasten the screws (Part 33) into the wall.
  • Page 12 STEP 17 40 x 2pcs Use a screw driver to fasten the screws (Part 40) into the bracket.
  • Page 13 SURFACE CARE INSTRUCTIONS A li le care and a en on will extend the life and good looks of your furniture. Take care when using materials which might spill, or be sharp or abrasive, on the surface of your furniture. Normal Cleaning: For normal cleaning use a so dry, clean cloth.
  • Page 14: Warranty Policy

    2. Subject to Clause 1, the Seller warrants that CRITERION branded products will be free of manufacturing defects and will perform to the Seller’s specifica�ons subject to the following clauses.