Table of Contents
Related Manuals for ANLIDAR MYTORQ MY5-TR0212L
Summary of Contents for ANLIDAR MYTORQ MY5-TR0212L
- Page 1 OPERATION AND MAINTENANCE MANUAL MY5-TR0212L MY5-TR0319L MY5-TR0212LF MY5-TR0317LF MY5-TR0212P MY5-TR0319P MY5-TR0212PF MY5-TR0317PF DC-TYPE Automatic Non Carbon Brush Series ANLIDAR INDUSTRIAL CO., LTD. http://www.anlidar.com Y2F160A-3E-004...
-
Page 2: Important Safety Information Enclosed
NOTICE Metal Assembly Screwdrivers are designed for installing threaded fasteners in light industrial and appliance manufacturing applications. Anlidar is not responsible for customer modification of tools for applications on which Anlidar was not consulted. WARNING Important safety information enclosed. Read all these instructions before placing tool in service or operation this tool and save these instructions. It is the responsibility of the employer to place the information in this manual into the hands of the operator. -
Page 3: Important Safety Rules
Important Safety Rules WARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock fire and/or serious injure. The term “power tool” in all of the warning listed below refer to your mains operated (corded) power tool or battery operated (cordless) power tool. - Page 4 4) Power tool Use and Care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use power tool if switch does not turn it on or off.
-
Page 5: Do Not Operate This Tool Without Protective Earth Connected
WARNING！ DO NOT OPERATE THIS TOOL WITHOUT PROTECTIVE EARTH CONNECTED Grounding Instructions 1、This tool should be grounded while in use to protect the operator from electric shock. NOTICE ! To ensure the grounding result, the grounding conductor of the power cord must be well connected with the grounding terminal of power facility. This tool is equipped with grounding conductors. - Page 6 Operations Cautions 1) Whenever changing a bit, make certain the Forward / Reverse Switch is in the “ OFF “ position and tool is unplugged. 2) To avoid damaging the housing of screwdriver, do not allow chemicals get in touch with housing of screwdriver. Ex.: Acetone, benzene, thinner, trichloroethylene ketone, and other similar chemicals.
-
Page 7: Description Of Operation
Description of Operation Attaching / detaching bit and bit type Push up the holder clamp by finger tip, and it will be unlocked. Thus, the bit can be freely attached and detached (single finger notion type) select such a bit whose shank is equal to the size shown below. ... -
Page 8: Do Not Attempt To Repair This Electric Screwdriver
All repairs and maintenance of this tool and its word must be performed by an authorized service center. Anlidar is not responsible for customer modification of tools for applications on which Anlidar was not consulted. Repairs should be made only by authorized, trained personnel. Consult your nearest MYTORQ authorized service center. -
Page 9: Specifications
Specifications MODEL (MY5-) TR0212L TR0319L TR0212LF TR0317LF TR0212P TR0319P TR0212PF TR0317PF Input voltage(DC) DC 24V OR 32V Power Consumption (kgf.cm) 1.5-12 3-19 1.5-12 3~17 2-12 3-19 2-12 3~17 Torque (Lbf.in) 1.33-10.44 2.57-16.46 1.33-10.44 2.57~14.78 1.77~10.44 2.57-16.46 1.77~10.44 2.57~14.78 (N.m) 0.15-1.18 0.29-1.86 0.15-1.18 0.29~1.67... -
Page 10: Torque Adjustment Operation
6. The power supplier will generate low power when the button of the power controller is switched to "LO." Also, the electric screwdriver's torque output setting value should be adjusted to middle torsion value accordingly. 7. Please refer to Anlidar website http://www.anlidar.com for the detail component list.
Need help?
Do you have a question about the MYTORQ MY5-TR0212L and is the answer not in the manual?
Questions and answers