Error Codes - Electrolux ETE4607 User Manual

ERROR CODES & ALARMS
Alarms
Alarm Icon
All Freezer Model

Error codes

Error code
Communication Error
Sensor
– Open Circuit /Short Circuit
What it means
Freezer Temperature Alarm
(Except Single door freezer)
Activates if the freezer temperature is
10°c over set temperature for a period of
50 minutes (except during a defrost).
An alarm will sound the temperature
icons will flash.
Door Alarm
Activates if the refrigerator or freezer
doors are left open for longer than
2 minutes.
An alarm will sound the affected
compartment icon will flash and
the temperature and icons will fade
on and off.
What it means...
If you see this icon displayed (electronic
display models) or the top temperature
icon is flashing it means that the control
has lost contact with the main
control board.
The appliance will operate at its last
known setting, all auxiliary functions will
not work.
If you see this icon displayed (electronic
display models) or any combination of the
second and fourth temperature icons are
flashing it means that an error has been
detected on a sensor.
The refrigerator will run in a default cycle
to prevent food spoilage.
Operation
To deactivate the alarm for 50 minutes
press any button.
To deactivate alarm for 12 hrs on the ice &
water model press and hold Select Mode for
10 seconds for non ice and water models
press and hold any button for 10 seconds.
• Alarm will sound and icon will flash
indicating which door is open.
(Ice & water models)
• To silence the alarm for 8 minutes while
the door is open press any button (the
icons will continue to flash until door
is closed).
What to do...
Turn the unit off at the power
point for 5 minutes and then turn it
back on.
Under most circumstances this will
reset the display enabling normal
function to continue.
If the error re-occurs then call
for service.
Call for service.
21