The Freezer User Interface - Electrolux ETE4607 User Manual

20 electrolux.com.au
CONTROLLING (CONTINUED)

THE FREEZER USER INTERFACE

Description
Fast Ice on/off LED
Ice Maker on/ off LED
Fast Ice/Ice Maker button
Turning Automatic Ice Maker
On/Off
Ice cube size
Ice cube size can be adjusted
for personal preference or to
suit supply water pressure
Freezer temperature
scale icons
Temperature adjust button
Replace filter
Reminder for when the water
filter requires replacement.
IMPORTANT
The factory default settings for the freezer is "-18°C". If you want to change the temperature,
remember to make only small adjustments and wait 24 hours to see if it's correct.
EFE4227
Fast Ice
on/off LED
Ice Maker
on/off LED
Freezer
temperature
scale LEDs
Operation / Primary Function
Indicates the status of the Fast Ice function.
Indicates the status of the Ice Maker function.
Use the Fast Ice function when you add a large amount of food to the freezer
compartment;
• Press the 'Fast Ice/Ice Maker' button. The Fast Ice icon will flash indicating that the
Fast Ice is active. and the compressor will run continuously for 12 hours
• After 12 hours the freezer will automatically return to normal mode.
• The Fast Ice function can be cancelled anytime by pressing the button again.
• Press and hold the 'Fast Ice'/Ice Maker button for 3 seconds.
The Ice Maker LED will activate indicating that the Ice Maker is active.
• Ice Maker can be turned off at any time. Press and hold the 'Fast Ice'/Ice Maker
button for 3 seconds.
Extra large
Large
Medium
Small
Indicates the temperature setting of the freezer compartment.
Press any button to awaken control.
Press the 'Temp' button to decrease the compartment temperature. Once the coldest
temperature is reached the display will return to the warmest setting with the next press.
Replace filter alarm will activate as a reminder to replace the water filter.
An alarm will sound and the Fast Ice on/off icon will flash. Hold "TEMP" button for
3 seconds to reset.
Fast Ice/ Ice maker on/off button
Temperature adjust/Replace filter button
Press "Temp" and "Fast Ice" buttons together for 3 seconds
within first 12 seconds of appliance starting. Four pre-set ice
cube sizes can be selected by the user. Press "Fast Ice" button to
scroll through options and press "Temp" button to confirm.