Installation And Door Closing - Jenn-Air JUBFL242HX Use And Care Manual And Installation Instructions

INSTALLATION AND DOOR CLOSING

Your beverage center has four leveling legs. If your
beverage center seems unsteady or you want the door to
close more easily, adjust the beverage center's tilt using
the instructions below.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1.
Plug into a grounded 3 prong outlet.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
center.
Failure to do so can result in back or other injury.
When Moving Your Beverage Center:
Your beverage center is heavy. When moving the beverage
center for cleaning or service, be sure to cover the oor with
cardboard or hardboard to avoid oor damage. Always pull
the beverage center straight out when moving it. Do not
wiggle or "walk" the beverage center when trying to move it,
as oor damage could occur.
10
2.
Move the beverage center into its final location.
3.
Turn the leveling legs to the right to lower the
beverage center, or turn the leveling legs to the left to
raise it. It may take several turns of the leveling legs to
adjust the tilt of the beverage center.
NOTE: Having someone push against the top of the
beverage center takes some weight off the leveling
legs. This makes it easier to adjust the leveling legs.
4.
Open the door and check that it closes as easily as
you like. If not, tilt the beverage center slightly more
to the rear by turning both front leveling screws to
the right. It may take several more turns, and you
should turn both leveling legs the same amount.
beverage