Wiring - LG PDI Premium PQNUD1S40 Installation & Owner's Manual

Wiring

• Separate the power supply case.
• Loosen the clamp fixating the power supply.
• Connect the 220V power cable to the black and grounding terminal.
• Connect the 24V power cable to the yellow terminal.
• Use the clamp to fixate the 220V and 24V power cable.
• Use the screw to assemble the case.
• Use the included screws to fixate the power indicator and power supply at appropriate loca-
tions within the electric panel.
• Connect the 24V power cable connected to the power supply to the power terminal of the
power indicator.
• Wire wattmeter, gas meter, central controlled communication cable, and the repeater for re-
mote reading.
• Install the included core to the 220V power cable.
Power connection
220V AC
Mounting on wall
WARNING
!
• Always tighten the terminal screws so that they do not
become loose.
• When connecting the power and communication cable,
always use the terminal (O-Ring, Y-Ring).
• For 220V power cable, use (CV) 1.5mm
power cable, use the CV wire.
CAUTION
!
• Power must be turned on after the product is wired completely.
Install core
POWER WHM
MENU
SELECT
PQNUD1S40
ODU WHM CHECK
2
x3 and for 24V
INSTALLATION METHOD
POWER
WHM
MENU
SELECT
PQNUD1S40
ODU WHM CHECK
15