LG PDI Premium PQNUD1S40 Installation & Owner's Manual page 27

Setting detailed properties (EHP products)
• Wattmeter property setting: Based on the wattmeter type setting, it automatically switches to
property setting screen.
- Pulse type: Set power consumption by pulse, set attached location (Indoor/Outdoor unit
classification), set indoor unit address
- CT type: Set CT and device constant value, set attached location (Indoor/Outdoor unit
classification), set indoor unit address
- RS-485 communication type: Set wattmeter address, set attached location (Indoor/Outdoor
unit classification), set indoor unit address
• When setting pulse type
C O N N E C T I O N :
W H M T Y P E :
R E M O T E C O M :
S T A N D B Y P :
W H M 1 : N O T U S E
W H M 2 : N O T U S E
W H M 3 : N O T U S E
W H M 4 : N O T U S E
* W H M W / P U L S E
1 . N O T U S E
2 . 1 W / P U L S E
3 . 2 W / P U L S E
C O N S U M E U N I T
1 . O U T D O O R U N I T
2 . I N D O O R U N I T
I N D O O R A D D R E S S
( S T A R T ) → ( E N D )
( 0 0 ) → ( 0 0 )
W H M 1 : 2 W , O D U ,
W H M 2 : N O T U S E
W H M 3 : N O T U S E
W H M 4 : N O T U S E
After setting all wattmeters, press the MENU button to save the setting and move to the initial
screen.
M A S T E R
Press the (▼) button at the initial setting screen to
P U L S E
enter the wattmeter property setting screen.
N O T U S E
A U T O
When the wattmeter item to set flashes, press the
SELECT button to change to detail setting win-
dow.
It proceeds in the order of Set power consumption
S E L E C T *
by pulse ' Set power consumption device ' Set
connected indoor address.
- Set power consumption by pulse (WHM
D O W N
: Enter the value displayed on the wattmeter as
S E L E C T
- Set power consumption device (CONSUME
: Check and set whether the product on which the
- Set connected indoor address (INDOOR
S E T
: Enter the indoor address connected to applicable
After setting the applicable item, press the
SELECT button to save the setting and to move to
the next stage.
0 0 - 0 0
Setting information is reflected to the detail setting
window.
SETTING AND USING METHOD
W/PULSE SELECT)
power consumption per pulse
UNIT SELECT)
wattmeter is installed is a indoor or outdoor unit.
ADDRESS SET)
wattmeter.
27