SETTING AND USING METHOD
20
Setting
Description of button function
- Menu button: Move to standby screen after setting is completed. Use for reading wattmeter
- Direction button: Move to item to set
- SELECT button: Enter applicable setting window and set changed information
Enter function setting mode
POWER
PQNUD1S40
• If entering the setting screen for the first time.
- After turning power on, press the 'MENU' button and the 'SELECT' button at the same
time and the screen will change to the screen where you can select the product connec-
tion type. Select the product type to connect, and then press the 'SELECT' button.
Then, the selection of the product will be saved and the screen will be switched to the
main standby screen.
E L E C T R I C
D I S T R I B U T O R
<Main standby screen>
WHM
MENU
SELECT
ODU
WHM CHECK
P O W E R
MENU
SELECT
P R O D U C T
T Y P E
1 . E H P
2 . G H P
C H A N G E
S E T T I N G
<Connection Product Type Setting Screen>
I N F O !