LG PDI Premium PQNUD1S40 Installation & Owner's Manual page 41

• Checking the accumulative power (Accum Power) (1 ~ 4 ports)
Accumulative power: Values have been continuously accumulated since the initial power is ap-
plied on the power indicator. When wattage is more than 999.999, it will return to "0".
- Screen Description
A C C U M ( P 1 )
I D - 0 1 :
I D - 0 2 :
I D - 0 3 :
- Press the LEFT/RIGHT (◀,▶)button to increase/decrease the wattmeter number.
- Press the UP/DOWN (▲,▼)button to check the electric energy of all indoor units connected.
- If the standby power is set to Manual, the last page is displayed as follows.
A C C U M ( P 1 )
S T B P :
• Checking the accumulative gas consumption (Accumulative Gas) (5 ~ 8 ports)
Instant gas: Values have been accumulated since the initial power is applied at the gas meter.
When the displayed gas usage is more than 999.999, it will return to "0".
- Screen Description
A C C U M ( G 1 )
I D - 0 1 :
I D - 0 2 :
I D - 0 3 :
- Press the LEFT/RIGHT (◀,▶)button to increase/decrease the wattmeter number.
- Press the UP/DOWN (▲,▼)button to check the gas energy of all indoor units connected.
h In the case of gas on, standby gas usage is not displayed separately because there is no
standby gas.
0 . 0 k W h
0 . 0 k W h
0 . 0 k W h
0 . 0 k W h
0 . 0 k W h
0 . 0 k W h
D O W N
0 . 0 k L
0 . 0 k L
0 . 0 k L
0 . 0 k L
SETTING AND USING METHOD
Wattmeter number
Total accumulative wattage
at P (1) wattmeter
The accumulative wattage of each
indoor unit
Each indoor unit No.
Gas meter No.
Total accumulative gas usage
at G (1) gas meter
The accumulative gas usage of each
indoor unit
Each indoor unit No.
41