Setting Minute Timer; Setting Silent Control Operation; Setting Lockout Feature; Fahrenheit Or Celsius - Frigidaire Professional FPEF4085KF Use And Care Manual

setting main oven controls

setting minute timer

The timer on . oFF pad controls the Minute Timer
feature. The Minute Timer serves as an extra timer in
the kitchen that will beep when the set time has run
out. It does not start or stop cooking. The Minute Timer
feature can be used during any of the other oven control
functions. Refer to "Minimum and Maximum Control Pad
Settings" for time amount settings.
to set the minute timer (example for 5 minutes)
1. Press timer on . oFF. "-- --" will appear and
"timer" will flash in the display.
2. Press the number pads to set the desired time in the
display.
3. Press start. The time will begin to count down with
"5:00" and "timer" will stay in the display. Note:
If start is not pressed the timer will return to the
time of day after 25 seconds.
4. When the set time has run out, "end" and "timer"
will show in the display. The clock will sound with
3 beeps every 5 seconds until timer on . oFF is
pressed.
to cancel the minute timer before the set time has
run out
1. Press timer on . oFF. The display will return to the
time of day.

setting lockout Feature

The pad controls the Lockout feature. The Lockout
feature automatically locks the oven door and prevents
the oven from being turned ON. It does not disable the
clock, Minute Timer or the interior oven lights.
To activate the Oven Lockout feature
1. Press and hold for 3 seconds.
2. After 3 seconds a beep will sound, "loc" will appear
and "door locked" will flash in the display.
Once the oven door is locked the "door locked"
indicator will stop flashing.
To reactivate normal oven operation:
1. Press and hold for 3 seconds. A beep will
sound. "loc" will disappear. The "door locked"
will flash in the display until the oven door has
completely unlocked.
2. The oven is again fully operational.
16

setting silent control oPeration

The delaY start and selF clean pads control
the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated
without sounds or beeps whenever necessary. If desired
the control can be programmed for silent operation and
later returned to operating with all the normal sounds
and beeps.
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent
operation press and hold delaY start for 7
seconds. "-- --" will appear and "delaY" will flash in
the display. After 7 seconds "sP" or "- -" will appear
in the display.
2. Press selF clean to switch between normal sound
operation and silent operation mode. The display will
show either "sP" or "- -". Note: If "sP" appears, the
control will operate with normal sounds and beeps.
If "- -" appears, the control is in the silent operation
mode.
3. Press start to accept the change or press cancel
to reject the change.
note: The control will always beep at the end of a
minute timer and will beep when a set temperature
has been reached, even if the control is set to silent
operation.
SETTING TEMPERATURE DISPLAY —

FaHrenHeit or celsius:

The BROIL and selF clean pads control the
Fahrenheit or Celsius temperature display modes. The
oven control can be programmed to display temperatures
in Fahrenheit or Celsius. The oven has been preset at the
factory to display in Fahrenheit.
To change display from Fahrenheit to Celsius or
celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius
press BROIL and hold it for 7 seconds; "550°" will
appear and "BROIL" will flash in the display and a
beep will sound. If "F" appears, the display is set to
show temperatures in Fahrenheit. If "c" appears, the
display is set to show temperatures in Celsius.
2. Press selF clean to switch between Fahrenheit or
Celsius display modes. The display will show either
"F" or "c".
3. Press start to accept the change or press cancel
to reject the change.