Installing The Belt Clip - Nortel 4027 User Manual

All manuals and user guides at all-guides.com
Handset accessories
Item
Bluetooth Bluetooth module for the DECT 4070
Module Handset.

Installing the belt clip

You can use the belt clip to fasten the handset on a belt (swivel belt clip),
shirt or coat pocket (executive clip).
To install the belt clip, perform the following steps:
1. Place the handset facedown on a flat surface.
2. Use the plastic tool to unlock the fastening of the belt clip
compartment cover as shown in
The plastic tool is shipped in the box with the handset.
3. Slide out the belt clip compartment cover.
4. Remove the plastic tool.
5. Install the swivel belt clip as shown in
as shown in Figure
186
Description
Figure
Figure 18
19.
Order
code
N0162966
17.
or the executive clip