Alarms - Nortel 4027 User Manual

All manuals and user guides at all-guides.com
Accessories
Start
4. Press the
Lap
5. Press the
Stop
6. Press the
Continue
7. Press the
Reset
8. Press the

Alarms

Use the Alarm feature to set up daily or recurring weekly alarms.
This section describes the following tasks:
• "Assigning a daily alarm" (page 129)
• "Editing a daily alarm" (page 130)
• "Turning off a daily alarm" (page 131)
• "Assigning a recurrent alarm" (page 131)
• "Editing a recurrent alarm" (page 132)
128
Start soft key to start timing.
The Stop or Continue
key after you begin the timer.
Lap soft key to stop and save the
previous measure and start a new one (if required).
Attention: You can save only two measures in your
handset. If you run the stopwatch for the third time
and save the measure, it overwrites the first
measure.
Stop soft key to stop measuring.
Continue
or the Reset soft key to reset the stopwatch.
Clr key one or more times to return to the
idle display.
key replaces the
soft key to continue measuring
Start soft