Connection - Lincoln LMC 1 User Manual

User Manual
LMC 1
COBRA chain-lubrication systems, continued
Operating mode
The following parameters are controlled or monitored for
COBRA chain-lubrication systems via the standard LMC 1
programming:

Connection

Fig. 30 Signal input connection
A - External contact, chain forwards
E – Air pressure switch
Fig. 31 Control output (ACTUATOR) connection
Q1 - Pump Q2 - System (ready for operation)
Q5 - COBRA 1X-2 PE - Protective earth conductor
LINCOLN GmbH • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
B - Chain sensor
F - Malfunction, right side
Variable:
- Nipple cleaning time
- Cycle-dependent lubrication
- Number of pause cycles
- Number of chain links
Fixed:
- Filling time monitoring 1 min.
C – Low-level signal
G - Malfunction, left side
Q3 - Clean
L+ - Power supply +
9.3EN-98001-A07
6618b06
D – Lubricant pressure
H - Locking
6612b06
Q4 - COBRA 1X-1
M - Power supply –
Page 29 of 36