AOpen AP5V User Manual page 63

Plug and Play Aware O/S
Enable this parameter only if you have a Plug-and-Play operating system, such
as Windows 95.
PCI IRQ Priority Auto Setting
Yes
Set this parameter to
No
each PCI slot. Select
1st/2nd/3rd/4th Available IRQ
These parameters are configurable only if the PCI IRQ Priority Auto Setting
No
parameter is set to
appropriate interrupt for each occupied PCI slots.
PCI VGA Palette Snoop
PCI devices support the palette snooping technique that enables the device to
control access to their palette registers. Enable this parameter to activate the
palette snooping function in the PCI VGA devices installed in the system.
Check your VGA card manual for more information about his function. The
Disabled
default setting is
PCI IDE Card
This function allows you to select the PCI slot(s) that you want to enable, if
there is any offboard PCI IDE card present.
automatically configure the installed PCI card.
AMI BIOS Utility
to automatically set the appropriate interrupt for
if you prefer to manually set the interrupts.
. When configurable, these let you specify the
.
Set this parameter to
Auto
to
3-23