Ec Declaration Of Conformity - Stanley FATMAX SCD700 Manual

ENGLISH

EC declaration of conformity

%
MACHINERY DIRECTIVE
SCD700 - Drill
STANLEY Europe declares that these products described
under "technical data" are in compliance with:
EN62841-1:2015 , EN62841-2-1:2018.
These products also comply with Directive 2006/42/EC,
2014/30/EU and 2011/65/EU. For more information, please
contact STANLEY Europe at the following address or refer to
the back of the manual.
For more information, please contact STANLEY FATMAX at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
STANLEY FATMAX.
STANLEY Europe, Egide Walschaertsstraat14-18,
Guarantee
STANLEY FATMAX is confident of the quality of its products
and offers consumers a 12 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with STANLEY FATMAX Terms and Conditions and you will
need to submit proof of purchase to the seller or an authorised
repair agent. Terms and conditions of the STANLEY FATMAX
1 year guarantee and the location of your nearest authorised
repair agent can be obtained on the Internet at www.2helpU.
com, or by contacting your local STANLEY FATMAX office at
the address indicated in this manual.
Please visit our website www.stanleytools.eu/3 to register
your new STANLEY FATMAX product and receive updates on
new products and special offers
10
(Original instructions)
Patrick Diepenbach
Technical Director of Engineering
2800 Mechelen, Belgium
11.03.2021