On-Screen Displays And Data Code - Canon VIXIA HF S10 Instruction Manual

To activate an effect
mode: Activate the selected effect while recording or in record
pause mode.
mode: Activate the selected effect and then press
record the photo.
NOTES
• When you apply a fader, not only the picture but also the sound will fade
in or out. When you apply an effect, the sound will be recorded normally.
• The camcorder retains the last setting used even if you deactivate the
selected digital effect or change the recording program.
• Faders cannot be used when recording video snapshot scenes or when
pre-recording is activated.

On-Screen Displays and Data Code

You can turn most on-screen displays on or off.
Repeatedly press
following sequence:
, mode:
• All displays on
• Most displays off*
• Full-screen display** (
mode:
• All displays on
• Data code only
• All displays off
mode:
• All displays on
• Regular displays only (removes the histogram and information icons)
• All displays off
78
Video
DISP.
to turn the on-screen displays on/off in the
)
PHOTO
( 33)
to