Canon VIXIA HF S10 Instruction Manual page 158

Canon hd camcorder instruction manual
Hide thumbs Also See for VIXIA HF S10:
Table of Contents

Advertisement

Accessing the memory card. Do not remove the memory card.
- You opened the memory card slot cover while the camcorder was accessing the memory card
or the camcorder started accessing the memory card as you opened the memory card slot
cover. Do not remove the memory card until this message disappears.
Back up recordings regularly
- This message may appear when you turn on the camcorder. In the event of a malfunction,
recordings may be lost so back up your recordings regularly.
Buffer overflow. Recording was stopped.
- The data transfer rate was too high for the memory card in use and the recording was
stopped. Replace the memory card with one rated Speed Class 2 or higher.
Built-in memory error
- The built-in memory could not be read.
Built-in memory is full
- The built-in memory is full ("
(
58, 97) to free some space.
Cannot access the built-in memory
- There is a problem with the built-in memory.
Cannot communicate with the battery pack. Continue using this battery pack?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
Cannot copy
- The total size of the scenes you selected to copy exceeds the available space on the memory
card. Delete some recordings on the memory card (
scenes to copy (
Cannot divide the scene. Initialize only using the camcorder.
- The scene could not be divided because the camcorder's internal scene management data log
is full. Save your recordings (
backup files and try dividing the scene again.
Cannot edit
- Could not move a scene in the playlist.
Cannot enter standby mode now
- The camcorder cannot enter standby mode if the remaining battery charge is too low.
Cannot play back
- There is a problem with the memory.
Cannot play back Cannot access the built-in memory
- There is a problem with the built-in memory.
Cannot play back Check the memory card
- There is a problem with the memory card.
158
Additional Information
End" appears on the screen). Delete some recordings
91).
125) and initialize the memory (
58, 97) or reduce the number of
42). Write back the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents