Changing System Setup - Honeywell Home RTH9600WF User Manual

Changing system setup

Note: Touch the orange Help button on any screen for more information.
System Setup Options (SETTINGS > System Setup)
Screen Title
Language
Thermostat installed in
Your thermostat
location
Your thermostat
controls
Your system type
Your forced air heating
system type
Efficiency of your
heating system
Your heating system
type
Number of cooling
stages
Number of heating
stages
Your fan control
Type of changeover
valve
Number of heat pump
compressor stages
Your backup heat
33-00593ES_A.indb 35 33-00593ES_A.indb 35
Settings and Options (Options vary depending on setup.)
English/Français/Español.
Home/Business (Thermostat is used in a residential (default) or commercial setting).
Touch THERMOSTAT button to display a screen where you can enter a custom name using a
keypad. If you have only one thermostat, you can leave the name as THERMOSTAT. For business
installations you can check a box to display the thermostat name on the home screen.
Select Heating or Cooling or both (default).
Select Forced Air (default), Heat Pump, or Hot Water or Steam. Each option offers different choic-
es on the following screens. See Step 9e under Installing your Thermostat on page 14.
Select type of furnace. This menu option only appears if Forced Air is selected for "Your System
Type".
Select Standard Efficiency Forced Air (default) or High Efficiency Forced Air.
If you selected Hot Water or Steam on "Your system type," select the specific heating system
here.
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires you have connected: 'Y'
wire only (1 stage) or 'Y' and 'Y2'(refer to your check list in Step 6 on page 8) Number of cool
stages does not appear if "Heat Pump" is selected or cool stages is set to "0".
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires you have connected: 'W'
wire only (1 stage) or 'W' and 'W2' (refer to your check list in Step 6 on page 8) Number of
heat stages only appears if "Forced Air" is selected for "Your System Type".
Select whether your thermostat (default) or heating system controls the fan. Y our fan control only
appears if "Electric" is selected for "Your Forced Air Heating System Type".
If you selected Heat Pump on "Your system type," select whether it uses a cooling changeover
valve (default) or heating changeover valve. f you are unsure, note which wires you have
connected: refer to your check list in Step 6 on page 8).
Select 1 Stage (default) or 2 Stages. If you are unsure, note which wires you have connected: 'Y'
wire only (1 stage) or 'Y' and 'Y2'(refer to your check list in Step 6 on page 8).
No or Yes (default) you can determine whether you have backup heat by refering to your check
list in Step 6 on page 8. Your backup heat only appears if "Your System Type" is set to Heat
Pump.
35
69-2715EF—07
9/20/2021 7:09:55 PM 9/20/2021 7:09:55 PM