Speakerphone Operation
2. Press the
redial
-OR-
3. Press the
redial
button first, then use the CID/vol or buttons to select the desired redial number.
- Press CID/volto review the oldest call and scroll toward the most recent calls (higher numbers).
- Press CID/volto review the newest call and scroll to older calls (lower numbers).
NOTE: You may choose from three last dialed numbers.
4. Press the home button. The number dials automatically.
If, when using the telephone land line, you get a busy signal and want to keep dialing the number,
press the
redial
button to quickly redial the number.
Exit
Press the flash/exit button to exit a menu function and return to the standby screen.
Page
The page feature helps you locate a misplaced handset. To send and receive pages, all handsets must be
registered. If your handset is not registered, follow the instructions in the Registration section of this manual.
Paging from the Base/Group Page
Use the base to page
1. Press the page button on the base.
shows on each handset's display.
2. To cancel the page, press the page button on the base, or press the home button or flash/exit
button on each handset.
Hold
1. Press the hold button on the handset to put a call on hold. LINE ON HOLD shows on the display
for land-line calls. CELL ON HOLD shows on the display for cell calls.
2. To take the call off hold, press the hold button again.
To switch a land-line call on hold from one handset to another, press the home button on the handset. If
you continue the call on a separate extension phone, the call is released to the extension phone. The switch
function works for land-line calls only.
Mute
To have a private, off-line conversation, use the MUTE feature. The party on the telephone line
cannot hear you, but you can hear them.
1. Press the prog/mute button. The handset display shows MUTE ON.
2. Press the prog/mute button to cancel and return to your phone conversation.
Receiver Volume Control
When the handset is ON (in talk mode) you may adjust the receiver volume by pressing the
CID/vol or buttons. There are four volume levels to choose from. When the maximum or
minimum volume level is reached, the phone beeps twice. VOL 1 is minimum and VOL 4 is maximum.
28
button.
any
registered handsets at the same time.
All
handsets beep for two minutes, and PAGING FROM BASE