Deleting Acid Record; Deleting All Cid Records Changing The Battery - RCA 23200 User Manual

3. If the number does not dial as shown, press the format/conference button. Repeat if necessary,
until the correct number of digits show in the display.
4. Press the home button or cell button on the handset. The number dials automatically.
NOTE: If the telephone number is corrupted, such as an alphabetical character in a number field,
you will hear an error tone and the number is not dialed. Unit displays "UNABLE TO DIAL".
Deleting a CID Record
the cordless handset
1. Make sure
2. Use the CID/vol or buttons to display the CID record you want to delete.
3. Press the delete button. The display shows DELETE CALL ID?
4. Press the delete button to erase the record showing in the display. The display shows DELETED.
NOTE: Press the flash/exit key to return to the standby mode.
Deleting All CID Records
1. Make sure the cordless handset
2. Use the CID/vol or buttons to scroll to any CID record.
3. Press and hold the delete button until DELETE ALL? shows in the display.
4. Press delete button to erase all of the current CID records. The display shows
DELETED followed by NO CALLS.
NOTE: Press the flash/exit key on the handset to return to the standby mode.
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only
the battery 5-2670
1. Make sure the telephone is OFF (not in talk mode) before you
replace battery.
2. Remove the battery compartment cover.
3. Disconnect the cord attached to the battery pack from the jack
inside the battery compartment and remove the battery pack
from the handset.
4. Insert the new battery pack and reconnect the battery plug.
5. Put the battery compartment cover back on.
is OFF (not in talk mode).
is OFF (not in talk mode).
that is compatible with this unit.
Basic Information
Battery
pack plug
Battery
compartment
37