Table of Contents
Advertisement
Area Code
1. Make sure
the cordless handset
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Press the CID/vol or buttons to scroll to the AREA CODE menu.
6. Press prog/mute button to enter the menu. SET AREA CODE - - - shows in the display.
7. Use the touch-tone pad to enter your 3-digit area code.
8. Press the prog/mute button to confirm. You will hear a confirmation tone and the new area code
shows in the display.
NOTE:
To restore the default setting to - - -, press and release the delete button when SET AREA
CODE shows in the display.
Key Tone
1. Make sure
the cordless handset
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Press the CID/vol or buttons to scroll to the KEY TONE menu.
6. Press prog/mute button to enter the menu. SET KEY TONE 1ON 2 OFF shows in the display.
7. Use the touch tone pad on the handset to select 1 or 2, or use the CID/vol or buttons to
scroll to your selection. "1ON" is the default setting.
8. Press the prog/mute button to confirm and the key tone setting shows in the display.
Handset Registration
Your handset is pre-registered and ready to use. It is not recommended that handset be registered
again unless absolutely necessary.
1. Make sure
the cordless handset
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Press the CID/vol or buttons to scroll to the REGISTRATION menu.
6. Press prog/mute button to enter the menu. REGISTRATION 1YES 2NO shows in the display.
7. Use the touch tone pad on the handset to select 1 or 2, or use the CID/vol or buttons to
scroll to your selection. "2NO" is the default setting.
is OFF (not in talk mode).
is OFF (not in talk mode).
is OFF (not in talk mode).
Programming the Handset
21
Advertisement
Table of Contents
