Programming The Handset; Standby Screen; Programming Functions; Room Monitor - RCA 23200 User Manual

Programming the Handset

Standby Screen

The handset displays the user name (if entered) and handset number.

Programming Functions

The system uses a menu structure to give you access to all of the built-in features. You may program
the following items in main menu: Room Monitor, Handset Setup.

Room Monitor

1. Make sure the cordless handset
2. Press the prog/mute
3. Press the CID/vol orbuttons
4. Press prog/mute
the display.
5. Use the touch tone pad to enter the handset number to be monitored,
6. The receiving handset will turn on the microphone and the originating handset will turn on the
earpiece to monitor sound from the receiving handset.
NOTE: For room monitoring mode to work, the originating handset must NOT be on the cradle.
NOTE: While in room monitoring mode, the handsets will emit an alert tone approximately every
5 seconds if there is an incoming call. You may press the
answer the call.
NOTE: While in room monitoring mode, the originating handset can be switched to monitor by
speaker mode by pressing the
button once.
NOTE: Press the flash/exit button on the handset to exit room monitor mode.
USER NAME
HANDSET X
is OFF (not in talk mode).
button to go to the main menu.
�ROOM MONITOR
HANDSET SETUP
to scroll to ROOM MONITOR.
button to enter ROOM MONITOR menu, ROOM MONITOR EXTENSION ? shows in
speaker
Programming the Handset
home
button once. Switch back to earpiece by pressing the
either 1, 2, or 3.
button to quit room monitor and
home
15