Adjusting The Volume; Viewing Still Images - Canon PICTBRIDGE DC22 Instruction Manual

Adjusting the Volume

The camcorder plays the sound with the
built-in speaker. The volume will be
muted when you close the LCD panel.
Speaker
SYSTEM SETUP
VOLUME
MENU
( 27)
1
Press .
MENU
2
Select ( ) [SYSTEM SETUP] and
press ( ).
3
Select ( ) [VOLUME] and press
( ).
4
Adjust ( ) the volume as desired
and press ( ).
To turn off the volume completely,
keep pressing (
icon changes to
5
Press to save the setting and
MENU
close the menu.
( 13)
) until the volume
.

Viewing Still Images

1
Move the power switch to ON, then
slide it down towards MODE and
release it to set the camcorder in
PLAY mode.
The green PLAY indicator will turn on.
2
Move the /
(Still images) position.
3
If necessary, change the media for
the still images.
Refer to Selecting the Media for the
Still Images (
4
Use the multi selector (
move between images.
IMPORTANT
The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer (except for the sample images for the
Card Mix function).
- Images whose file names have been
changed.
Avoid the following actions while the disc/card
access display (
screen, and when either the DISC access or
CARD access indicator is on or flashing. Failing
to do so may result in permanent data loss.
- Do not subject the camcorder to vibrations or
strong impacts.
Playback
35
( 13)
switch to the
32).
) to
or ) appears on
E