Playback
36
- Do not open the disc cover or the memory
card slot cover and do not remove the disc or
memory card.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
switch or the operating mode.
Slideshow
SLIDESHOW
FUNC.
(
27)
1
Press
.
FUNC.
2
Select (
) [
press (
).
3
Select (
) [START] and press
(
).
• Images are played back one after
another.
• Press
to stop the slideshow.
FUNC.
Index Screen
1
Move the zoom lever toward W.
The still images index screen appears.
2
Select (
,
• Move the cursor
you want to view.
-
+
• Press
or
(
or
NEXT
PREV.
controller) to move to the next/previous
index page.
3
Move the zoom lever toward T.
The index screen closes and the
selected image is displayed.
Image Jump Function
You can also quickly locate a specific
image without having to browse all of
them one by one.
Push the multi selector (
keep it pressed down.
Image numbers will quickly run in
sequence. When you release the multi
/
SLIDESHOW] and
) an image.
to the image
on the camcorder
on the wireless
) and
selector the image corresponding to the
number selected will be displayed.
Magnifying the Still Image
During playback, still images can be
magnified up to 5 times.
1
Move the zoom lever toward T.
• The image is magnified by 2 times
and a frame appears indicating the
position of the magnified area.
• To further enlarge the image, move
the zoom lever toward T. To reduce the
magnification to less than 2 times,
move the zoom lever toward W.
•
will appear for images that cannot
be enlarged.
2
Select the part of the image to be
magnified with the multi selector.
• Move (
,
of the image you want to see enlarged.
• To cancel the magnification, move
the zoom lever toward W until the
frame disappears.
(
13)
Zoom lever
Multi selector
) the frame to the part