Getting Started; Preparing The Power Supply - Canon PICTBRIDGE DC22 Instruction Manual

Canon camcorder user manual
Hide thumbs Also See for PICTBRIDGE DC22:
Table of Contents

Advertisement

Preparations

Getting Started

Getting Started

Preparing the Power Supply

The camcorder can be powered with a
battery pack or directly using the compact
power adapter. Charge the battery pack
before use.
CHARGE indicator
Remove the battery terminal
cover (
100) before
attaching the battery
1
Turn off the camcorder.
2
Attach the battery pack to the
camcorder.
• Open the LCD panel.
• Slide in the connector end of the
battery in the direction of the arrow and
press it gently until it clicks.
Recording Mode
Viewfinder
XP
LCD [NORMAL]
LCD [BRIGHT]
Viewfinder
SP
LCD [NORMAL]
LCD [BRIGHT]
Viewfinder
LP
LCD [NORMAL]
LCD [BRIGHT]
* Approximate times for recording with repeated operations such as start/stop, zooming, power
on/off.
BATT. switch
Maximum
Recording Time
70 min.
70 min.
70 min.
80 min.
80 min.
75 min.
90 min.
85 min.
85 min.
3
Connect the power cord to the
compact power adapter.
4
Plug the power cord into a power
outlet.
5
Connect the compact power adapter
to the camcorder's DC IN terminal.
• The CHARGE indicator starts
flashing. The indicator will stay on
when the charging is completed.
• You can also use the compact power
adapter without attaching a battery
pack.
• When the compact power adapter is
connected, even if a battery is
attached its power will not be
consumed.
Typical
Recording Time*
40 min.
40 min.
40 min.
45 min.
45 min.
45 min.
45 min.
45 min.
45 min.
Getting Started
21
DC IN terminal
Playback Time
90 min.
100 min.
110 min.
E

Advertisement

Table of Contents
loading

Table of Contents