Selecting The Media For The Still Images - Canon PICTBRIDGE DC22 Instruction Manual

Canon camcorder user manual
Hide thumbs Also See for PICTBRIDGE DC22:
Table of Contents

Advertisement

Recording
32
1
Move the power switch to ON to set
the camcorder in CAMERA mode.
The red CAMERA indicator will turn
on.
2
Move the
/
(Still images) position.
3
If necessary, change the media for
recording the still images.
Refer to Selecting the Media for the
Still Images (
4
Press
PHOTO
halfway.
• Once the focus is automatically
adjusted,
will turn green and one or
more AF frames appear.
• When you press
wireless controller, the still image is
recorded immediately.
5
Press
PHOTO
fully.
The CARD access or DISC access
indicator will flash as the image is
being recorded.
IMPORTANT
Avoid the following actions while the disc/card
access display (
screen, and when either the DISC access or
CARD access indicator is on or flashing. Failing
to do so may result in permanent data loss.
- Do not subject the camcorder to vibrations or
strong impacts.
- Do not open the disc cover or the memory
card slot cover and do not remove the disc or
memory card.
switch to the
32).
on the
PHOTO
or
) appears on
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
switch or the operating mode.
NOTES
If the subject is not suitable for autofocus,
turns yellow. Keep
PHOTO
and adjust the focus manually with the multi
selector (
).

Selecting the Media for the Still Images

You can record still images on the
memory card or the disc. The default
media for still images is the memory card.
As long as you do not change the
recording destination, still images will be
recorded on the last selected media.
MENU
(
27)
1
Press
.
MENU
2
Select (
) [SYSTEM SETUP] and
press (
).
3
Select (
) [MEDIA SEL.
press (
).
4
Select (
) [DISC] or [CARD] and
press (
) to save the setting and
close the menu.
When recording, the operating mode
symbol will change to
(CARD stills), depending on the
media selected. In playback mode, the
operating mode symbol will change to
(DISC stills) or
respectively.
/
pressed halfway
(
13)
] and
(DISC stills) or
(CARD stills),

Advertisement

Table of Contents
loading

Table of Contents