Canon PICTBRIDGE DC22 Instruction Manual page 26

Getting Started
26
moving the camcorder while the
operation is in progress.
• You can start recording movies once
the record pause
appears.
IMPORTANT
The process of recognizing a disc may take a
moment. The display will move while the
disc is being read. Wait until the camcorder
finishes recognizing the disc before you start
recording.
Removing the Disc
1
Move the power switch to ON.
2
Slide OPEN fully in the direction of
the arrow and gently open the disc
cover completely until it stops.
• Do not subject the camcorder to
strong impacts while the DISC access
indicator is on or flashing.
• Retract the grip belt under the
camcorder so it will not get in the way
of the disc cover.
• It may take a moment after sliding
for the disc cover to open.
OPEN
3
Grab the edge of the disc and gently
pull it out.
Be careful not to touch the recording
surface of the disc or the pick up lens.
4
Close the disc cover.
When you slide
indication
recording, important file allocation data is
updated on the disc before the disc cover
opens. While the DISC access indicator is on or
flashing do not subject the camcorder to shocks
such as forcefully laying it on a table.
IMPORTANT
OPEN after making a