Adjusting The Picture: Exposure, Focus And Color; Manual Exposure Adjustment - Canon PICTBRIDGE DC22 Instruction Manual

POINTS TO CHECK
Mode switch:
Available aperture values
[1.8], [2.0], [2.4], [2.8], [3.4], [4.0], [4.8],
[5.6], [6.7], [8.0], [9.5], [11], [14], [16]
FUNC.
( 27)
1
Select the recording program
[ APERTURE-PRIO.AE] as
described in Selecting the
Recording Program (
2
Press ( ).
3
Change ( ) the aperture value and
press ( ) to save the setting.
Smaller aperture values (or f/
numbers) represent a larger lens
opening, and vice versa.
NOTES
Available aperture values vary depending on
the zoom position.
The aperture value flashes when the selected
aperture is not appropriate for the recording
condition. In such case, readjust the aperture.

Adjusting the Picture: Exposure, Focus and Color

Adjusting the Picture:
Adjusting the Picture: Exposure, Focus and Color
Exposure, Focus and Color
( 13)

Manual Exposure Adjustment

Adjust the exposure when a subject is
underexposed (for example, when backlit
subjects appear too dark in the image) or
overexposed (for example, when
recording subjects under very strong light
and they appear too bright or glaring in
the image).
47).
Mode switch:
[ FIREWORKS] recording program).
1
Press (
• The exposure adjustment indicator
appear on the screen.
• If you operate the zoom during
exposure lock, the brightness of the
image may change.
2
Adjust (
image as required.
• The adjustment range and the length
of the exposure adjustment indicator
will vary depending on the brightness
of the picture at the time you locked
the exposure.
• Pressing ( )
the exposure lock and return the
camcorder to automatic exposure.
POINTS TO CHECK
(except for the
) EXP .
and the neutral value "±0"
) the brightness of the
EXP
49
( 13)
again will cancel
E