Selecting The Media For The Still Images - Canon DC20 Instruction Manual

When the subject is too bright, "OVEREXP." starts flashing. In such case, use
the optional FS-H27U ND filter.
In order to save power when the camcorder is powered by a battery pack, the
camcorder will automatically shut off if left without any operations for 5 minutes
(
continue recording, turn the power switch to OFF and then back to CAMERA.

Selecting the Media for the Still Images

You can record still images on the memory card or the disc. The default media for still
images is the memory card.
1. Set the camcorder to record or view still images (
2. Press the MENU button. Using the omni selector (
[SYSTEM SETUP] menu and press (
3. Select (
4. Change (
the selection and close the menu.
When recording, the operating mode symbol will change to
(CARD STILLS), depending on the media selected. In playback mode, the operating
mode symbol will change to
Downloaded From VideoCamera-Manual.com Manuals
36
84). " AUTO POWER OFF" appears 30 seconds before shutoff. To
).
) the [MEDIA SEL.
) the setting to [DISC] or [CARD] and press (
).
] option and press (
(DISC STILLS) or
) select the
).
) to save
(DISC STILLS) or
(CARD STILLS), respectively.
or