Table of Contents
Advertisement
Step 5
Remove the G586OPA from its original packing box.
Be careful to avoid touching all connectors and pins on
the board. Please refer to the handling instructions on
pages 2-1 and 2-2 for proper handling techniques.
Step 6
Insert the HSIM modules into the SIMM banks on the
G586OPA. The quantity and location of the SIM
modules is dependent upon the memory configuration
and type of modules you intend to use.
Step 7
Set the corresponding jumpers.
Step 8
Install the prepared G586OPA system board into the
case and replace the screws.
Step 9
Reinstall all cards and connectors and replace the sys-
tem unit cover. Reconnect all power cords and cables.
Installation Overview u 2-37
G586OPA
Advertisement
Table of Contents
