Scene - Yamaha AVENTAGE CX-A6200 Owner's Manual

■ Ultra Low Jitter PLL Mode
Enables/disables the jitter elimination function.
Input source
AV 1-7, AUDIO 1-4 (available only when any audio digital input jack is assigned), (network sources),
Bluetooth, USB
Settings
Off Disables the jitter elimination function.
Enables the jitter elimination function.
The higher level enhances the DAC accuracy, but may cause audio interruptions
Level 1, Level 2, Level 3
on some playback devices depending on the audio clock conditions. In this case,
select lower level.
■ DAC Digital Filter
Selects the digital filter type of the audio DAC (digital-to-analog converter) to have favorite
sounds.
Settings
Removes out-of-band noises by the filter with steep attenuation characteristics.
Sharp Roll-off Type
It has a tendency to produce clear sounds.
Removes out-of-band noises by the filter with gentle attenuation characteristics.
Slow Roll-off Type
It has a tendency to produce soft sounds.
Reduces the audio delay caused by the DAC internal digital filter.
Short Latency Type
It has a tendency to produce responsive and rhythmical sounds.
■ Balance Input Attenuator
Selects whether to activate the attenuator for the balance input (AUDIO 4) so that you can
avoid sound distortion when high-level signals are input.
Activate the attenuator when connecting an audio device which outputs signals of 3 V (RMS) or
higher to the AUDIO 4 (XLR balanced input) jacks (p.36).
Input source
AUDIO 4
Settings
Bypass Does not activate the attenuator for the balance input.
ATT.(-6dB) Activates the attenuator for the balance input to reduce the signal level (-6dB).

Scene

Configures the scene settings.
■ Scene Setting
Selects items to be included as the scene assignments. You can also view the settings currently
assigned to the selected scene.
X
The scene assignments can include radio stations, or the content on a selected USB storage device, Bluetooth
device, and network device.
■ Procedure
1
Use the cursor keys to select the SCENE name and press ENTER.
2
To include items as the scene assignments, use the cursor keys to select an item and press
ENTER to check the box (or uncheck the box to exclude).
Choices
HDMI Control Control Sync (HDMI Control (p.134))
Input Input (p.63), Audio Select (p.112)
[Input sources: TUNER, (network sources), SERVER, NET RADIO, Bluetooth, USB]
Station, Music Content
Registerd Content
[Input sources: others]
---
HDMI Output HDMI Output (p.63)
DSP Program (p.67), Pure Direct Mode (p.130), Enhancer (p.140), Hi-Res Mode
Mode
(p.111), SURROUND:AI (p.66)
Tone Control (p.110), YPAO Volume (p.110), Adaptive DRC (p.110),
Sound
Extra Bass (p.112)
Surround Dialogue Lift (p.111), Dialogue Level (p.110), Subwoofer Trim (p.112)
131
En