Yamaha AVENTAGE CX-A6200 Owner's Manual page 133

Resolution
Selects a resolution to output HDMI video signals when "Video Mode" is set to "Processing".
Settings
Through Does not convert the resolution.
Auto Selects a resolution automatically in accordance with TV resolution.
Output video signals with a selected resolution.
480p/576p, 720p,
1080i, 1080p, 4K
(Only the resolutions supported by your TV are selectable.)
X
If you need to select a resolution that is not supported by your TV, set "MONITOR CHECK" (p.149) in the
"ADVANCED SETUP" menu to "SKIP" and try again. (Note that the output video may not be displayed on your TV
normally.)
Aspect
Selects an aspect ratio to output HDMI video signals when "Video Mode" is set to "Processing".
Settings
Through Does not convert the aspect ratio.
Outputs 4:3 video signals to a 16:9 TV with black bands on either side of the
16:9 Normal
screen.
X
This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or 2160p
(4K) signals.
Adjustment
Configures the video adjustments when "Video Mode" is set to "Processing". You can register
the video adjustments as presets (up to 6).
X
The video adjustments work on the video signals with 1080p or lower resolution.
■ Setup procedure
1
Use the ENTER to select a preset number.
2
Use the cursor keys to select an item.
3
Use the cursor keys to select a setting.
4
To exit from the menu, press SETUP.
Detail Enhancement
Adjusts the enhancement effect of video details.
Setting range
0 to 50
Edge Enhancement
Adjusts the enhancement effect of video edges.
Setting range
0 to 50
Brightness
Adjusts the video brightness.
Setting range
-100 to 0 to +100
133
En