Table of Contents
Advertisement
Rear Presence
Selects whether or not rear presence speakers are connected and their size.
Settings
Large
Select this option for large speakers.
Select this option for small speakers.
The subwoofer or front speakers will produce rear presence channel
Small
low-frequency components lower than the specified crossover frequency
(default: 80 Hz).
None
Select this option when no rear presence speakers are connected.
Layout Settings
Rear Height
Select this option when rear presence speakers are installed on the rear side wall.
Overhead
Select this option when rear presence speakers are installed to the ceiling.
Select this option when using the Dolby Enabled speakers as the rear presence
Dolby Enabled SP
speakers.
X
This setting is not available when "Surround" or "Front Presence" is set to "None".
Subwoofer
Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or SUBWOOFER 2 jack
and its phase.
Settings
Select this option when a subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack (phase not reversed). The subwoofer will produce LFE
Normal
(low-frequency effect) channel audio and low-frequency components from other
channels.
Use
Select this option when a subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack (phase reversed). The subwoofer will produce LFE
Reverse
(low-frequency effect) channel audio and low-frequency components from other
channels.
Select this option when no subwoofer is connected to the SUBWOOFER 1 or
SUBWOOFER 2 jack. The front speakers will produce LFE (low-frequency effect)
None
channel audio and low-frequency components from other channels when both
"Subwoofer 1" and "Subwoofer 2" are set to "None".
X
When the bass sound is lacking or unclear, switch the subwoofer phase.
Layout settings
Select this option when 2 subwoofers are placed on the left and right sides of the
Left + Right
room.
Select this option when 2 subwoofers are placed on the front and rear sides of the
Front + Rear
room.
Monaural x2
Select this option when 2 subwoofers are placed freely.
X
This setting is not available when "Subwoofer 1" or "Subwoofer 2" is set to "None".
■
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance from
"Meter" or "Feet".
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front
Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2
Setting range
0.30 m to 3.00 m to 24.00 m (1.0 ft to 10.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments
■
Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front
Presence R, Rear Presence L, Rear Presence R, Subwoofer 1, Subwoofer 2
Setting range
-10.0 dB to 0.0 dB to +10.0 dB (0.5 dB increments)
123
En
Advertisement
Table of Contents
