Data Network A Wiring For 2U1N Configuration - Dell EMC VxFlex Ready Node 14G Hardware Installation Manual

Wiring Diagrams for a 2U1N Configuration

Data network A wiring for 2U1N configuration

Hardware Installation Guide
82
Table 18 Management network cabling (continued)
Customer Provided Management Switch
Source
Node 17 BMC (iDRAC)
Node 17 NIC 1
Data Network Switch A <...> Port
Data Network Switch B <...> Port
Data Network Switch A Mgmt Port
Data Network Switch B Mgmt Port
Management Server NIC 1
Link to Core Switch or 2nd Rack Management
Switch
Use the following figure and table to connect the data network A cables.
Note
In this example, data switch ports have been intentionally left empty. These empty
ports can be used for other user-allocated purposes. If no other use is required for the
empty ports, nodes may be connected to the data switches without leaving empty
ports. However, ensure that on each node, each NIC is connected to a different data
switch (either Data Switch A or Data Switch B), in order to prevent a single point of
failure in case a switch fails.
Destination
Management Switch Port 29
Management Switch Port 31
Management Switch Port 45
Management Switch Port 46
Management Switch Port 47
Management Switch Port 48
Management Switch Port 38
Management Switch Port 52