Suspension - Yamaha Venture Lite PZ50RTB Owner's Manual

Venture multipurpose
Table of Contents

Advertisement

in your eyes, see your doctor immediately.
If gasoline spills on your skin, wash with
soap and water. If gasoline spills on your
clothing, change your clothes.
Recommended fuel:
PREMIUM UNLEADED GASOLINE
ONLY
Fuel tank capacity:
PZ50GT 26.7 L (7.05 US gal,
5.87 Imp.gal)
PZ50MT 26.7 L (7.05 US gal,
5.87 Imp.gal)
PZ50RT 26.7 L (7.05 US gal,
5.87 Imp.gal)
PZ50VT 32.9 L (8.69 US gal,
7.24 Imp.gal)
Your Yamaha engine has been designed to
use premium unleaded gasoline with a pump
octane number [(R+M)/2] of 91 or higher, or a
research octane number of 95 or higher.
If the recommended fuel is not used, the en-
gine may not perform as it should.
ECS00084
NOTICE
Oxygenated fuels (gasohol) containing
G
a maximum 10% of ethanol (E10) can be
used, although richer jetting may be re-
quired to prevent engine damage. Con-
sult
a
Yamaha
containing methanol is not recommend-
ed.
Make sure that snow or ice does not en-
G
ter the fuel tank when refueling.
Do not use alcohol deicers or water ab-
G
sorbing additives with oxygenated fuel.
The fuel tank should be filled with the
G
recommended gasoline. The use of oth-
er gasoline will cause severe damage to
internal engine parts, such as the valves
and piston rings, as well as to the ex-
haust system.
dealer.
Gasohol
Control functions
ESU10874

Suspension

The suspension can be adjusted to suit rider
preference. Softer settings, for example, may
provide greater rider comfort, while harder
settings may allow more precise handling and
control over certain types of terrain or riding
conditions.
If you are not familiar with suspension adjust-
ments, have a Yamaha dealer make these
adjustments.
EWS00151
WARNING
Read and understand the following infor-
mation before handling shock absorbers
that contain highly pressurized nitrogen
gas.
Do not tamper with or attempt to open
G
the cylinder assemblies.
Do not subject the shock absorbers to
G
an open flame or other high heat source.
This may cause the unit to explode due
to excessive gas pressure.
Do not deform or damage the cylinders
G
in any way. Cylinder damage will result
in poor damping performance.
Do not dispose of a damaged or worn
G
out shock absorber yourself. Take the
shock absorber to a Yamaha dealer for
any service.
ESU10905
Adjusting the spring preload of the
front shock absorbers (PZ50GT /
PZ50MT / PZ50VT)
EWS00720
WARNING
The spring preload of the left and right
shock absorbers must be adjusted to the
same setting. Uneven settings can cause
poor handling and loss of stability.
25

Advertisement

Table of Contents
loading

Table of Contents