Lubrication; Replacing A Headlight Bulb - Yamaha Venture Lite PZ50RTB Owner's Manual

ECS00610
NOTICE
Only use in deep snow riding condi-
G
tions.
Operation on areas with light snowfall,
G
ice, hard-packed snow, dirt, or grass will
result in rapid wear or damage to the
track and slide runners from lack of
snow which serves as a lubricant.
ESU12198

Lubrication

Lubricate the following points with the speci-
fied grease.
EWS00511
WARNING
Do not grease the throttle cable because it
could become frozen, which could cause
loss of control. Apply a dab of grease onto
the cable end only.
TIP
For parts equipped with a grease nipple, use
a grease gun.
Lubricants:
Brake lever:
Silicone grease
Other lubrication points:
Low-temperature grease
1. Lubrication point
Periodic maintenance and adjustment
1
1. Throttle cable end
PZ50RT / PZ50GT / PZ50MT
1. Grease nipple
PZ50VT
1. Grease nipple
ESU12242

Replacing a headlight bulb

1. Remove the
PZ50GT / PZ50MT) or open the shroud
(PZ50VT). (See page 49 for removal pro-
cedures.)
2. Disconnect the headlight coupler.
1
top cover (PZ50RT /
73