Table of Contents
Advertisement
power key.
Please note:
At the end of the cooking programme, remember to turn off the oven
manually.
Setting the clock display illumination
The display for the clock can be set either to be illuminated all the time
or to switch off 20 seconds after the last key is touched. To set this:
•
When the oven is in standby mode, touch and hold the "Memory"
key
for 5 seconds to enter settings mode.
•
The display will show "1 ln 1" or "1 ln 0". In either case the first digit is
the option selected for setting.
•
Use the "Function Down"
setting option "2". The display will show "2 ln 1" or "2 ln 0".
•
Use the "+" or "-" keys to select one of the settings for option 2:
Display Shows
2 ln 1
2 ln 0
•
Touch the "Memory" key
IMPORTANT:
When correctly installed, your product meets all safety
requirements laid down for this type of product. However, special
care should be taken around the rear or the underneath of the
appliance as these areas are not designed or intended to be
touched and may contain sharp or rough edges that could cause
injury.
and "Function Up"
Option Feature
The clock is lit all the time.
The clock illumination switches off after 20 seconds
briefly to confirm the setting.
keys to choose
19
Advertisement
Table of Contents
