Alarm And Detection; Set Up Motion Detection - Reolink RLC-510A User Manual

Reolink PoE Camera
And you can also enable the Auto-On for Live View, which means the spotlight
will automatically turn on when viewing the live feed and turn off afterwards.

4. Alarm and Detection

Set up Motion Detection

Reolink camera judges whether each macroblock has moved by dividing the grid.
When the number of moved blocks reaches a certain proportion of the number of
armed blocks, the alarm will start.
The working principle of motion detection is that a camera will judge it as a motion
when differences in 2 frames reach 0.5%-10% (customize by adjusting motion
sensitivity) of the image. When the picture changes, the number calculated and
compared will exceed the threshold and instruct the system to automatically
make corresponding process.
Detection Zone
Detection Alarm > Detection Zone > Create a zone over the area you don't want to
receive alerts about.
User Manual 30