Parts And Components; Before Use - cecotec CONGA 990 VITAL Instruction Manual

ENGLISH

2. PARTS AND COMPONENTS

Fig. 1.
1. Light indicator
2. Power/operation button
Light indicator
Steady orange light: low battery.
Blinking orange light: Charging
Steady blue light: fully charged/standby mode/cleaning.
Red light blinks: error.
Power/operation button
Long press this button for a few seconds to turn the robot on or off.
Press it to start cleaning too.
Main body and sensors
Fig. 2.
Fig. 3.
1. Anti-collision sensors
2. Free-fall sensors
3. Charging terminals
4. Omnidirectional wheel
5. Side brushes
6. Battery
7. Driving wheels
8. Power switch
9. Dust tank
10. Main brush
Components
Fig. 4.
Charging base
Fig. 5.
Power adapter
Fig. 6.
Remote control
Fig. 7.
Cleaning brush
Fig. 8.
CONGA 990 VITAL
26
Wet & dry tank
Fig. 9.
Primary filter and High-efficiency filter
Fig. 10.
Side brushes
Fig. 11.
2 mops
Fig. 12.
Main brush
Fig. 13.
Optional: Dust tank, silicone BestFriend care brush.
Charging base
Fig. 14.
1. Remote control holder
2. Charge indicator
3. Signal transmitter
4. Charging terminals
Remote control
Fig. 15.
1. Time settings
2. Direction buttons
3. Spot mode
4. Room mode
5. Scrubbing intensity levels
6. Mode and time display
7. Automatic charge/back home
8. Auto-cleaning/pause
9. Schedule
10. Edge mode
11. Suction power levels

3. BEFORE USE

Take the product out of the box and remove all packaging materials.
Make sure all parts and components are included and in good conditions. If any sign of visible
damage is observed, contact immediately with the official Technical Support Service of Cecotec.
Fig. 16.
Remove all objects around the robot such as clothing, papers, cables, curtains or other fragile
ENGLISH
CONGA 990 VITAL
27