Troubleshooting; Technical Specifications; Disposal Of Old Electrical Appliances; Technical Support And Warranty - cecotec CONGA 990 VITAL Instruction Manual

Hide thumbs Also See for CONGA 990 VITAL:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 13
ENGLISH
in use.
If the robot is not going to be used for a long period of time, remove the battery and store the
product and the battery in a safe and dry place.
To replace the battery, follow the instructions below:
Fig. 48.
Unscrew the 2 screws on the battery compartment, remove the battery cover and the battery.
Fig. 49.
Insert the new battery with the battery label facing up.
Fig. 50.
Place the battery and the battery cover in its place and fix properly de screws back again.

7. TROUBLESHOOTING

Robot signal
Cause
Wheel error
Red light
1 beep
(omnidirectional).
steady on
2
Side brushes error
beeps
3
Motor fan or filter error
beeps
4
beeps
Main brush error
2
Red light blinks
beeps
Bumper error
3
beeps
Free-fall sensor error.
4
The robot cannot return
beeps
to its charging base or
starting position.
CONGA 990 VITAL
34
Clean the omnidirectional wheel and
press the power button to restart.
Clean the side brushes and press the
power button to restart the robot.
Remove and clean the robot's dust tank.
Remove the robot's filter and shake off
any dust rests.
Remove and clean the robot's main
brush.
Check if the bumper is blocked and
press on both sides and center to
unblock it.
Check if the robot is placed on an
uneven surface, if its wheels are off the
ground or if it is stuck in a dark place
and move it to a new location. If not,
clean the free-fall sensor.
Make sure there are no obstacles in
front of the charging base. Clean the
charging terminals on both the charging
base and the robot with a clean, soft
and dry cloth.

8. TECHNICAL SPECIFICATIONS

Model: Conga 990 Vital
Product reference: 05417
Power: 100-240 V ~, 50/60 Hz
Battery: 14.4 V, 2600 mAh
Made in China | Designed in Spain

9. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
must be collected separately, in order to optimize the recovery and recycling
of the materials they contain, and reduce the impact on human health and
the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your
obligation to dispose of the appliance correctly.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.

10. TECHNICAL SUPPORT AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
The product has been disassembled, modified, or repaired by persons, not authorised by the
official Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years, based
on current legislation, except consumable parts. In the event of misuse, the warranty will not
apply.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
ENGLISH
CONGA 990 VITAL
35

Advertisement

Table of Contents
loading

Table of Contents