Table of Contents
Advertisement
Push in the detergent drawer.
4.
13.6 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press Start/Reload.
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: End.
13.7 Adding laundry
Press Start/Reload.
1.
The appliance pauses.
appears, it is not pos-
Note: If
sible to add laundry.
When
goes out, it is possible to
add laundry.
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press Start/Reload.
5.
13.8 Cancelling the pro-
gramme
Press Start/Reload.
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse
programme.
– If the water level is high, start
the
Spin programme or select
a suitable programme for drain-
ing.
→ "Programmes", Page 23
Remove the laundry → Page 27.
3.
13.9 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Start the
Spin programme or se-
1.
lect a suitable programme for
draining.
→ "Programmes", Page 23
Press Start/Reload.
2.
13.10 Unloading the laundry
Open the appliance door.
1.
Remove the laundry.
2.
13.11 Switching off the appli-
ance
Turn the programme selector to
1.
Off .
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the appliance door and de-
4.
tergent drawer open so that resid-
ual water can evaporate.
operation en
27
Advertisement
Table of Contents
