Table of Contents
Advertisement
en operation
¡ Observe the information on safety
→ Page 4 and preventing material
damage → Page 10.
The manufacturer's instructions for
use and dosage can be found on the
packaging.
Notes
¡ Only use liquid detergents that are
self-flowing
¡ Do not mix different liquid deter-
gents
¡ Do not mix detergent and fabric
softener
¡ Do not use products that have ex-
pired or are highly congealed
¡ Do not use products containing
solvents, caustic agents or volatile
substances (e.g. bleach)
¡ Use dyes sparingly as salt may
damage stainless steel
¡ Do not use bleaching agents in the
appliance
operation
13 Basic operation
operation
Note: You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.siemens-
home.bsh-group.com .
13.1 Switching on the appli-
ance
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Turn the programme selector to a
▶
programme.
26
13.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 23
If necessary, adjust the pro-
2.
gramme settings → Page 26.
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 26
Adjust the programme settings.
▶
→ "Buttons", Page 22
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Loading laundry
Note: To prevent creasing, take note
of the maximum load for the
→ "Programmes", Page 23.
Requirement: The laundry is pre-
pared.
→ "Laundry", Page 25
Open the door.
1.
Make sure that the drum is empty.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.5 Adding detergent and
care product
Note: Observe the information about
detergents and care products
→ Page 25.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 18
If required, add the care product.
3.
Advertisement
Table of Contents
