Table of Contents
Advertisement
Installation
Installation items
The factory only provides the plate with water treatment appliances without plugs.
Warning!
○ The electrical configuration should be as follows:
‐
The chlorine and acid pumps can't work if the filter pump is disabled.
‐
Being able to disable the chlorine and acid pumps if the filter pump is enabled.
○ Chemicals should be added downstream of pool accessories such as heating, UV‐
lighting, filters etc.
○ Combining chlorine and acid can result in chlorine gas. Ensure that the chemicals are
placed outside and they don't come in contact.
○ It is recommended to set the water treatment unit to bypass mode.
○ Install the water treatment unit on a stable platform.
○ Always keep the unit straight. If the unit has been tilted or placed on its side, the
electrodes can't function correctly.
○ The unit must be installed inside. If you wish to install your unit outside, please contact
your supplier.
○ Do not place sulfuric acid in the dispensers (HCl)
○ Acid and chlorine (liquid chlorine) may not be mixed. Mixing will result in chlorine gas.
Carefully store the chemicals so they do not come in contact.
○ The electrical parts of the unit (the dispensers) must be installed inside. Ensure that,
in case of a leakage, the unit will remain unaffected.
○ Ensure that the chlorine and acid containers are placed OUTSIDE or in a well ventilated
area.
5
Advertisement
Table of Contents
