Installation Of The Water Treatment Plate - Harmopool ZWMX7510-P Manual

Installation of the water treatment plate
1 Connect the water treatment plate to a stable wall.
2 Connect the inlet and the outlet so the water passes by the pH and redox measurement
electrodes, then past the dispenser caps.
If the water in the unit is heading the opposite way, simply unclick the measurement and
dispenser tubes, turn them around and reclick.
Bypass configuration is preferred:
3 Connect the electrical components as follows :
‐ The chlorine and acid pumps can't work if the filter pump is disabled.
‐ Being able to disable the chlorine and acid pumps if the filter pump is enabled.
6