Related Manuals for Fermax Placa Milo
Summary of Contents for Fermax Placa Milo
- Page 1 Fermax Placa Milo Installation and Usage Guide Date: Friday, 11 June 2021 Authors: Justin Bateson...
-
Page 2: Table Of Contents
Contents Overview....................................3 Features........................................4 Changelog....................................5 Version 20210609....................................5 Introduction..................................6 Configure Device....................................7 Minimum Configuration..................................7 Manual Configuration..................................7 GENERAL......................................7 SIP........................................8 SIP TRUNK......................................8 SIP CALL......................................9 Licensing....................................10 Configure Control4................................... 11 Auto Configure the Door Station............................. 11 FAQ......................................12 What cool things can we do with this driver?......................... 12 What products will this work for?............................... -
Page 3: Overview
Overview This driver provides integrators with a driver that configures the Fermax MEET Placa Milo door station to work with with Control4. With our driver you can configure the door station and Control4's Communication's Agent all from the Proeprties tab of the driver. -
Page 4: Features
Features • Control4 OS 3.0 Support • Configure the door station without accessing the door station's web user interface • Have both audio and video intercom • Unlock the door connected to the door station from the Control4 interface • Select the call group that the door station will call, from within the Properties tab Page 4... -
Page 5: Changelog
Changelog Version 20210609 Initial release Page 5... -
Page 6: Introduction
The driver is able to auto configure the Fermax Milo doorstation for a simple setup. If you have a more complex site, you can manually configure the Fermax door station and the driver. You must take care that the settings in the driver match the configuration of the door station's web ui. -
Page 7: Configure Device
Configure Device Minimum Configuration 1. Identify and reserve an IP address via the site's DHCP server 2. Change the network settings such as IP address, Subnet Mask and Gateway of the device 3. Change the default username and password as required 4. -
Page 8: Sip
SIP SERVER This is usually the IP address of the C4 controller. You can check this address in Composer > Agents> Communication > Advanced tab > IP Address. It should have SIP: in front of the IP Address DOMAIN This is the same IP Address as the SIP SERVER above SIP USER This needs to be exactly the same as the setting in the driver's Properties tab SIP PASS This needs to be exactly the same as the setting in the driver's Properties tab SIP TRUNK... -
Page 9: Sip Call
SIP CALL The only requirement here is that the APARTMENT and NUMBER in the table matches the GENERAL menu settings Page 9... -
Page 10: Licensing
Fermax will provide you with a unique Licence Key. You will need to provide Fermax with the MAC address of the Control4 controller that the driver will be used Enter the Licence Key provided by Fermax into to the Properties field and press Set... -
Page 11: Configure Control4
*Make sure you have completed the licensing steps before proceedi 1. Open Composer and Search for Fermax 2. Add the driver Fermax Placa Milo Door Station Driver to your project 3. Update the following as required: • IP Address The IP address of the door station •... -
Page 12: Faq
• The driver's Auto setup functionality makes configuration of the door station and Control4 quick and easy. • The door station can unlock the door from the Control4 user interface What products will this work for? This will work with Fermax's range of Milo door stations Page 12... -
Page 13: Troubleshooting
Troubleshooting I can't see the door station on the network The door station only has statically defined network properties. The device comes with the following configuration: IP address: 10.1.1.2 username: admin password: 123456 You'll need to change the IP address to match a valid, and DHCP reserved, IP address on the network that the Control4 controller can reach.