Table of Contents
Advertisement
Available languages
Available languages
attachment end
2
. An attachment must be attached
to the housing before use.
Attachments (Fig. B, C)
Blower
To connect the extension attachment, end attachment or
inflator/deflator attachment to the blower outlet:
1. Line up the pegs
11
on the inside of the attachment
with the notches
12
of the housing opening.
2. Push the extension attachment
housing and turn left to lock. Pull on the attachment to
ensure it is securely in place.
3. To remove the extension attachment
unlock and pull it off of the blower housing.
Fig. B
12
Deflator
To connect the inflator/deflator attachment
deflator intake
9
:
1. Line up the detents on the attachment with the notches
on the top, bottom and sides of the intake.
2. Press the adapter onto the intake.
3. To remove the inflator/deflator attachment from the
tube or intake, pull the adapter away from the tool.
Fig. C
8
9
onto the blower
1
1
, turn right to
1
11
8
to the
OPERATION
WARNING:
serious personal injury, turn tool off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can cause injury.
WARNING:
without tube securely in place. Never reach down into
housing through tube hole.
WARNING:
battery when:
•
You leave blower unattended or when storing.
•
Checking, adjusting, cleaning, or working
on blower.
Installing and Removing the Battery Pack
(Fig. D)
nOTE: For best results, make sure your battery pack is
fully charged.
To install the battery pack
6
battery pack with the rails inside the tool's handle and slide
it into the handle until the battery pack is firmly seated in
the tool and ensure that it does not disengage.
To remove the battery pack from the tool, press th e release
button
and firmly pull the battery pack out of the tool
7
handle. Insert it into the charger as described in the charger
section of this manual.
Fig. D
6
Proper Hand Position (Fig. E)
WARNING:
personal injury, ALWAYS use proper hand position
as shown.
WARNING:
personal injury, always hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the main
handle
13
.
English
To reduce the risk of
Do not operate blower
Always remove the
into the tool handle, align the
7
To reduce the risk of serious
To reduce the risk of serious
7
Advertisement
Table of Contents
