Maintenance - Craftsman CMCBL0100 Instruction Manual

English
Fig. E
13
Switching On (Fig. E, F)

CAUTION:
self or bystanders.

CAUTION:
hearing protection. Wear a filter mask if the operation
is dusty. Use of gloves, long pants and substantial
footwear is recommended. Keep long hair and loose
clothing away from openings and moving parts.
To turn the blower on, depress the variable speed trigger
switch 3 . As trigger is pulled from min to max position (or
full off to full on), the airflow from the blower will increase
from min to max. Release the trigger fully to turn the
blower off.
To lock the blower on, press the lock-on button
the variable speed trigger switch
blower off when using the lock-on button, pull the trigger
to release the lock. Hold the blower with one hand, as
shown in Figure E, and sweep from side to side with tube
output end several inches above the hard surface. Slowly
advance, keeping the accumulated pile of debris in front
of you.
Fig. F
8
Do not point unit discharge at
Always wear safety glasses and
with
4
3 depressed. To turn the
4
5
3
Speed Selection (Fig. F)
The 3-speed toggle switch
5
that can be achieved when trigger is fully depressed. Push
the 3-speed toggle switch 5
down to decrease air flow.

MAINTENANCE


WARNING:
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can cause injury.
Accessories

WARNING:
those offered by CRAFTSMAN, have not been tested
with this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
CRAFTSMAN recommended accessories should be
used with this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN, call 1-888-331-4569.
Versatrack™ (Fig. G)

WARNING:
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can cause injury.

WARNING:
personal injury, do not use a damaged Versatrack™
hang hook or Versatrack™ Trackwall. A damaged
Versatrack™ hang hook or Versatrack™ Trackwall will
not support the weight of the tool.

WARNING:
serious personal injury, ensure the screw holding the
Versatrack™ hang hook is securely tightened.

WARNING:
personal injury, DO NOT suspend tool overhead
or suspend objects from the hang hook. ONLY
suspend tool on the Versatrack™ Trackwall using the
hang hook.

WARNING:
does not exceed the maximum rated weight for the
selected Versatrack™ hook.

WARNING:
Versatrack™ Trackwall rail, adequately space the tools
in order to not exceed 75 lb (35 kg) per linear foot.
sets the maximum airflow
up to increase air flow; push it
To reduce the risk of
Since accessories, other than
To reduce the risk of
To reduce the risk of serious
To reduce the risk of
To reduce the risk of serious
Ensure that the tool weight
When hanging objects on a
G